ACTi B77A 6MP IR Hemispheric Outdoor Network Camera

ACTi B77A Features

Device

• Product Type Hemispheric Dome
• Maximum Resolution 6MP
• Application Environment Outdoor
• Image Sensor Progressive Scan CMOS
• Sensor Size 1/1.8 "
• Effective Pixels 3096(H) X 2080(V) (6.44 MP)
• Day / Night Yes
• Low Light Sensitivity Superior
• Minimum Illumination Color: 0.1 lux at F2.8 (30 IRE, 2400 K); B/W: 0 lux at F2.8 (IR LED on)
• Color to B/W Switch ISP based switch, configurable
• Mechanical IR Cut Filter Yes
• IR Sensitivity Range 700-1100nm
• IR LED Adaptive IR LED x 18 (850 nm)
• IR Working Distance 20m
• Electronic Shutter 1/5-1/16000sec (manual mode); 1/5-1/16000sec (auto mode)
• Horizontal Resolution (TV Lines) 1800 TVL
• S/N Ratio 56 dB

Lens

• Focal Length Fixed focal, f1.65mm
• Aperture F2.8
• Iris Fixed iris
• Focus Fixed focus
• Lens Mount Board mount
• Horizontal Viewing Angle 198.5° (overview area); 121.1° (high detail area); Vertical Viewing Angle 198.5° (Fisheye View)
• Viewing Angle Adjustment Rotation: -175°-175°

Video

• Compression H.264 (Baseline/ Main/ High profile), MJPEG
• Maximum Frame Rate vs. Resolution (Fisheye View): 20 fps at 3072 x 2048; (Dewarped View): 30 fps at 1920 x 1080; (ePTZ View): 30 fps at 1920 x 1080
• View Mode Fisheye View, Dewarped View, ePTZ View, 270-degree Corner View
• Multi-Streaming Simultaneous triple streams based on three configurations
• Bit Rate 128Kbps - 12Mbps (per stream)
• Bit Rate Mode Constant, Variable
• Wide Dynamic Range Extreme WDR (130 dB)
• Image Enhancement White Balance, Brightness, Contrast, Sharpness, Automatic gain control, Flickerless, Defogging , Digital Noise Reduction 2D + 3D DNR , Privacy Mask 8 configurable regions , Text Overlay Yes, Image Orientation Flip, Mirror
• Built-in Analytics Object Based Motion Detection, Tamper, Shock Detection, Line Crossing*, Enter Area*, Missing Object*, Unattended Object*, Loitering*, Smoke Detection*, Fire Detection* (Some of the algorithms may not be available in the first release, can be upgraded for free later)
• VMS-based Analytics Object Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Line Crossing, Enter Area, Missing Object, Unattended Object, Smoke Detection, Heat Map, Dwell time, Direction Detection, License Plate Recognition, People Queue management, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
• IVS performance Certain algorithms may require more computing power, which may limit the number of algorithms that can be concurrently used in the camera. Please test the actual performance before using in a project.

Audio

• Audio Type 2-way, Built-in Microphone, Mic-in, Line-in, Line-out
• Audio Compression 8 kHz, 16 bit encoding, Mono, PCM, G.711

Network

• Network Protocol & Service IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP*, FTP*, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X, (*To be available through future firmware upgrade)
• Ethernet Port 1 x RJ-45 connector
• Security IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control

Event

• Event Trigger Video motion detection (10 regions), External device through digital input, Sound detection, Intelligent event detection (To be available through future firmware upgrade)
• Event Response Notify control center, Go to ePTZ preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Save video to local storage*, Upload video or snapshot to FTP server, Activate external device through digital output (To be available through future firmware upgrade)

Integration

• Unified Solution Fully compatible with ACTi software
• GPS Position Manual setting
• ONVIF Compliant Yes, Profile S, Profile G*
• GB28181 Compliant Yes
• Web Browser IE 9.0 or newer, Firefox with VLC, Chrome with VLC, Safari with QuickTime
• Auto Firmware Upgrade Yes

Interface

• Local Storage MicroSDHC, MicroSDXC memory card slot (card not included), To be available through future firmware upgrade
• Digital Input/Output 2/2

General

• Power Source DC 12V, PoE Class 3 (IEEE802.3af)
• Power Consumption 12.95 W (PoE)
• Environmental Casing Weatherproof (IP68), Vandal proof (IK10)
• Mount Type Surface, Rough Surface, Gang Box, Pendant, Tilted Mount, Wall Mount, Pole Mount, Corner Mount
• Starting Temperature -40°C ~ 50°C (-40°F ~ 122°F)
• Operating Temperature -40°C ~ 50°C (-40°F ~ 122°F)
• Warranty 3 Year(s)