- 1-way audio communication using SIP systems and/or ONVIF based VMS
- Low impedance loudspeaker connection and amplifier line out
- Class D amplifier and Digital Signal Processing (DSP)
- Remotely configurable via Web-GUI
| Power over Ethernet |
PoE IEEE 802.3af Class 3PoE+ IEEE 802.3at Class 4 |
| Power consumption |
PoE, <5 W in Idle<7 W at 1/8th of rated power<13 W at rated power |
| PoE+ |
<6 W in Idle<9 W at 1/8th of rated power<26 W at rated power |
| Ethernet |
100BASE-TX, 1000BASE-T |
| Protocols |
IPv4, SIP, NTP, TCP, UDP, HTTP,HTTPS, IPv4 link local, UPnP |
| SIP audio codecs |
G.711 (u-law and a-law), G.722, Opus |
| Ports |
1x RJ45 |
| Type |
Class D amplifier |
| Rated power (W) |
7 W with PoE (4-8 Ω)15 W with PoE+ (4-8 Ω) |
| Maximum output level |
10.95 V |
| THD+N (3 dB below max., @1 kHz) |
<0.03% |
| Signal-to-Noise Ratio (A-weighted) |
>95 dB |
| Type |
1 line-level input, 1 line-level output; unbalanced |
| Connector |
3-pin screw terminals |
| Accepted Wire gauge |
AWG 28 — AWG 14 |
| Maximum level line input |
1 V |
| Maximum level line output |
1 V |
| Line input impedance |
>10 kΩ |
| Line output impedance |
<100 Ω |
AMPLIFIER MODULE 15W, SIP
