Hanwha SBP-300HF Built-in SFP Install Base for PTZ Cameras

Discontinued - Recommended Replacement: No Replacement

Hanwha/Hanwha SHD-300HF Features

• Compatible Model: SNP-6320H/5430H
• Alarm I/O: Input 4ea / Output 2ea
• Remote Control Interface: RS-485/422
• Audio: Input / Output, 3.5mm type
• CVBS: BNC type, For installation
• Power Line: 24V AC, 2-wire
• Support SFP Voltage: 3.3V typical
• Support SFP Current: Max. 300mA
• Support SFP Cage: Standard mini-SFP cage (For 6.5mm pitch SFP)
• Support SFP Port Type: LC type
• Required SFP Speed: 1250Mbps (For 1000Mbps ethernet), 155Mbps (For 100Mbps ethernet)
• Required SFP's BER (Bit Error Rate): Max. 10-12
• Transmission Method (Optical): Mode depends on SFP module
• Optical Mode (Long / Short Wave): Mode depends on SFP module
• Cable Insertion Loss (dB): Mode depends on SFP module
• RJ-45 : Ethernet Speed: 100Mbps
• RJ-45 : Ethernet Physical Layer: 100 Base-T
• RJ-45 : Ethernet Standard: IEEE 802.3u support
• Speed Transition (100 1000Mbps): External Dip switch
• Fiber : Default Speed: 1000Mbps
• Fiber : Ethernet Speed: 100Mbps, 1000Mbps
• Fiber : Ethernet Physical Layer: 100 Base-FX, 1000 Base-X
• Fiber : Ethernet Standard: IEEE 802.3u, IEEE 802.3z support
• Operating Temperature / Humidity: -50°C ~ +50°C (-58°F ~ 122°F) / Less than 90% RH
• Ingress Protection: IP66
• Vandal Resistance: IK10
• Power Consumption: Max. 65W, 3.1A (Heater on)
• Input Voltage / Current: 24V AC
• Color / Material: Ivory / Aluminum
• Dimension (WxH): Ø163.9 x 157.9mm (Ø6.45" x 6.22"), Ø163.9 x 187.9mm (Ø6.45" x 6.7") (With NPT-Coupling)
• Weight: 1.1Kg (2.43 lb), 1.4Kg (3.09 lb) (With NPT-Coupling)