Planet
Planet VF-402-KIT 4-Channel 4-in-1 Video over Fiber(FC) converter up to 20KM
Usually Ships in 10 - 12 days
Reliable Long Distance Solution for Analog Surveillance System
To deploy AHD/CVI/TVI/CVBS analog camera in a remote place efficiently and provide high video quality and reliable signal, PLANET has developed the video over fiber media converter kit, VF-402-KIT, which is ideal for extending the distance and signal conversion by transmitting the AHD/CVI/TVI/CVBS video and data over the fiber-optic cable. Adopting the intelligent encoding/decoding technology and with the compact box, the VF-402-KIT video over fiber media converter enables the videos to be delivered in high quality up to 20km long in distance.
Fiber Optic Communication for Video and Serial Data
The VF-402-KIT consists of a Video Transmitter and a Video Receiver:
- VF-402-T: 4-channel Video over Fiber Transmitter
- VF-402-R: 4-channel Video over Fiber Receiver
-
The VF-402-KIT is a digital fiber-optic transmission system that brings users a cost-effective solution for transmission of 4-channel uncompressed digital video and one reverse RS485 async data over one single fiber cable. The VF-402-KIT is an adjustable free device providing high-quality and real-time video transmission. It can be widely used in intelligent transportation systems (ITS), traffic surveillance, security monitoring, automation control, intelligent residential districts, etc.
Industrial Monitoring Systems
The industrial-level VF-402-KIT’s wide temperature ranges from -20 to 70 degrees C, applicable to all kinds of environments. It supports hot plugging and its 4-channel video adopts the full digital video non-compression and Gigabit fiber optic transmission technology that brings distortion-free videos over a long-distance fiber cable. Thus, it can observe working condition visually with LED. It can be a standalone or rack-mounted structure, and is simple to operate with no field adjustment needed.
Video Characteristics | |
---|---|
Video Channel | 4-channel bi-direction |
Video Connector | BNC |
Supported Video Type | 1080p: AHD/TVI/CVI 480p: CVBS |
Video Input/Output Impedance | 75ohm/unbalanced interface |
Video Input/Output Voltage | 1.0 Vpp / typical peak-to-peak value |
Video Bandwidth | 25 to 60MHz |
Video Digital Bit Width | 8/10 bit |
Differential Gain (DG) | < 2% (typical value) |
Differential Phase (DP) | < 2° (typical value) |
SNR-weighted Scheme | > 67dB (typical value) |
Data Interface | |
Data Channel | 4 channels |
Physical Protocol | RS485 |
Operation Mode | Simplex |
Data Connector | 4 Pin terminal block with screw clamps |
Data Rate | DC-150Kbps |
Data Distance | RS485: 0-20km |
BPS | 0-115.2Kbps |
Bit Error Rate (BER) | < 10-9 |
Optical Interface | |
Optical Connector | FC |
Fiber Type | Single-mode, single fiber |
Distance | 20km for single mode |
Optical Wavelength |
VF-402-T TX: 1310nm RX: 1550nm VF-402-R TX: 1550nm RX: 1310nm |
Transmitter Coupled Power | Max.: 0dBm Min.: -8dBm |
Receive Sensitivity | -22dBm |
Link Budget | From 15dB to 20dB at 1310nm or 1550nm |
Cable | 9/125μm single-mode cable |
Hardware Specifications | |
LED Indicators |
|
Dimensions (W x D x H) | 157 × 116.5 × 48 mm |
Weight | 580g |
Power Requirement | 5V DC, 2A |
Chassis Current Consumption | 1.10 amp for 4-channel video and 1-channel data |
Mechanical | Metal |
Standards Conformance | |
Regulatory Compliance | FCC, CE |
Environment | |
Operating | Temperature: -20 ~ 70 degrees C Relative Humidity: 0 ~ 95% (non-condensing) |
Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 0 ~ 95% (non-condensing) |
Standard Accessories | |
Packet Contents | VF-402-T x 1 VF-402-R x 1 User’s manual x 1 5V/2A power adapter x 2 |
4-Channel 4-in-1 Video over Fiber(FC) converter up to 20KM, a pair include Tx & Rx in package (TVI/CVI/AHD/CVBS)