Vigitron Vi2516 16-Port MaxiiPower Managed 60W Midspan w/ UTP

MaxiiPower™ Vi2508 and Vi2516 midspans are designed to meet the most demanding IP camera data and PoE requirements at extended distances. They are fully manageable and provide up to 37W per port, with no power sharing. The Vi2500 series provide extended distance transmission over UTP using Vigitron's unique Symmetric Bandwidth (SBW™) technology.

With only a transceiver and no additional power source at the camera site, the Vi2500 series can provide full 802.3.af, 802.3at on all ports. In addition, they can provide up to 74W on each ports 1 through 4. for high power applications such as PTZ cameras. They are fully transparent to the Ethernet network and higher layer protocols, and require no IP setting or configurations. The PoE controller provides auto mode with no programing required.

The PoE is fully manageable by an easy-to-use Windows™ based GUI that can be accessed via direct connection to the USB port or remotely over network connections. It also operates in auto mode with no programing required. Standard accessory client software provides full security, discovery for all Vigitron Midspans’ set up and individual port monitoring. The built-in Ethernet extender technology simplifies the installation and lowers the cost of the system by eliminating the need for standard PoE midspans with far limited PoE power and protection capability.

MaxiiPower™ midspans provide status LED's to indicate power and transmission status to indicate potential problem areas. The PoE is fully manageable by an easy to use GUI that can be accessed via direct connection to the USB port or remotely over network connections.

The MaxiiPower™ extended midspans are 1 U hight installed in 19” racks. They are ideal for a wide range of CCTV or IT applications that require high power such as IP cameras, wireless access points or VoIP installed at extended distances.

Features

• High power midspan with built-in Ethernet extender for distances up to 3,000 ft (914 m)
• 8 or 16 port of IEEE 802.3 af/at compliant up to 37W per port simultaneously on all ports with no power management required
• Ports 1-4 can provide 74W each
• Provides full .af (12.95W) up to 3,000 ft./914 m and full .at (25.4W) up to 800 ft. (243 m)
• Per port delayed PoE power up programmable for reducing start-up power surges
• Can provide 100Mbps data and 74W PoE for IP cameras with heaters, blowers, and high speed PTZ operation
• Fully mananageable with Windows GUI accessible through local USB port or network connection with default plug-and-play option
• Managed in-rush current prevents shut down during camera events such as start-up, day/night, auto back focus heater and blower turn on, and PTZ operation
• No IP address programming or other networking setup required
• Limited lifetime warranty